The 8051 Microcontroller and Embedded Systems, Volume 1For courses teaching the 8051 Microcontoller. This book uses a step-by-step approach to teach the fundamentals of assembly language programming and interfacing of the 8051 microcontroller. It uses many examples to clarify concepts. Simple, concise examples are utilized to show what action each instruction performs, then a sample is provided to show its application. This text provides a comprehensive understanding of the internal organization of the 8051 registers and resources in a way that sheds the student's fear of assembly language. Whether students become designers of stand-alone systems or complex embedded systems, they will find this text a useful resource. |
From inside the book
Results 1-3 of 89
Page 88
Port 0 as input With resistors Vcc 10 K connected to port 0 , in order to make it an input , the port must be pro- grammed by writing 1 to P0.0 P0.1 DS5000 P0.2 8751 P0.3 all the bits . In the follow- 8951 P0.4 ing code , port 0 is con- ...
Port 0 as input With resistors Vcc 10 K connected to port 0 , in order to make it an input , the port must be pro- grammed by writing 1 to P0.0 P0.1 DS5000 P0.2 8751 P0.3 all the bits . In the follow- 8951 P0.4 ing code , port 0 is con- ...
Page 89
Port 1 as input To make port 1 an input port , it must programmed as such by writing 1 to all its bits . The reason for this is discussed in Appendix C.2 . In the following code , port 1 is configured first as an input port by writing ...
Port 1 as input To make port 1 an input port , it must programmed as such by writing 1 to all its bits . The reason for this is discussed in Appendix C.2 . In the following code , port 1 is configured first as an input port by writing ...
Page 322
SUMMARY output with This chapter described how to expand the I / O ports of the 8031/51 by con- necting it to an 8255 chip . The 8255 could then be programmed as a simple I / O port to control interfaced devices such as stepper motors ...
SUMMARY output with This chapter described how to expand the I / O ports of the 8031/51 by con- necting it to an 8255 chip . The 8255 could then be programmed as a simple I / O port to control interfaced devices such as stepper motors ...
What people are saying - Write a review
Reviews aren't verified, but Google checks for and removes fake content when it's identified
User Review - Flag as inappropriate
I have this book
Contents
CHAPTERS | 1 |
The 8051 Microcontrollers | 23 |
THE 8051 MICROCONTROLLERS 223 Section 1 1 Microcontrollers and Embedded Processors | 24 |
Copyright | |
19 other sections not shown
Other editions - View all
The 8051 Microcontroller and Embedded Systems: Using Assembly and C Mazidi Muhammad Ali No preview available - 2007 |
Common terms and phrases
ACALL ACALL DELAY addr addressing mode ASCII Assembly language baud rate binary bit addresses carry flag Chapter CJNE connected convert data pins decimal decoder discussed DJNZ DPTR EPROM Example execution external interrupt Figure flag bit frequency I/O ports instruction INT1 Intel interfacing interrupt vector table jump latch LCALL LJMP load logic loop machine cycle memory chip memory location microcontroller microprocessor MOV P1 MOV RO MOVX Notice NV-RAM on-chip ROM opcode operand output pointer program counter PSEN pull-up resistors pulse RAM location register bank reset Review Questions SBUF SECTION serial communication SETB TR1 Show signal SJMP Solution square wave stack stepper motor stop bit SUBB subroutine target address TCON timer Timer/counter TMOD transfer transistors True or false voltage Write a program
Bibliographic information
| Title | The 8051 Microcontroller and Embedded Systems, Volume 1 The 8051 Microcontroller and Embedded Systems, Muhammad Ali Mazidi |
| Authors | Muhammad Ali Mazidi, Janice Gillispie Mazidi |
| Edition | illustrated |
| Publisher | Prentice Hall, 2000 |
| Original from | the University of Michigan |
| Digitized | 5 Aug 2011 |
| ISBN | 0138610223, 9780138610227 |
| Length | 435 pages |
| Export Citation | BiBTeX EndNote RefMan |